Environmental and Social Impact Assessment
- Initial Environmental Examination (IEE)
- Environmental Impact Assessment (EIA)
- Environmental and Social Impact Assessment (ESIA)
- Environmental Management Plan (EMP)
- Resettlement Action Plan (RAP)
- Environmental Health and Safety (EHS) Management
- Environmental System Management
Environmental Monitoring and Test Assessment
- Laboratory Monitoring and Analysis Services
- Water Quality (pH, Temp., EC, Cl, Alkalinity, Turbidity, Total Hardness, Ca & Mg Hardness, Color, DO, BOD5, COD, TDS, TSS, SO4, PO4, NO2, NO3, NH3, Ca, Mg, Fe, As and heavy metal)
- Bacteriological test
- Air Quality (PM2.5, PM10, SPM, NOx, SOx, CO, O3, NH3, CH4 etc.
- Noise Level and Vibration
- Soil and Sludge Quality
- Compressive Strength Test
- Lung Function Test
- Calibration of Lab and Other Instruments
- Air Quality Modeling by AERMOD
ETP, SPT, ATP Design & Implementation
Effluent Treatment Plant (ETP), Sewage Treatment Plant (SPT) and Air Treatment Plant (ATP) Design & Implementation
- Physico-Chemical Treatment
- Biological Treatment (Aerobic, Anaerobic)
- Physico-Chemical Followed by Biological Treatment
- Advanced Conventional Technology
- Membrane Technology for Salt Recovery
- Sequential Batch Reactor (SBR)
- MBDR
ECL has successfully completed Effluent Treatment Plant (ETP) for different types of Industries. The activities involve the design, modification, construction, electro-mechanical equipment installation, supervision, commissioning, optimization of chemical dosing, monitoring after commissioning, training of staffs regarding the operation & maintenance of ETP and post operation services of ETP.
Zero liquid discharge (ZLD) plantToggle Title
Zero liquid discharge is a process that is beneficial to industrial and municipal organizations as well as the environment because it saves money and no effluent, or discharge, is left over. ZLD systems employ the most advanced wastewater treatment technologies to purify and recycle virtually all of the wastewater produced. Also Zero liquid discharge technologies help plants meet discharge and water reuse requirements, enabling businesses to:
ECL Laboratory provides services on monitoring, Sampling, Preservation, Transportation and Laboratory delivery of surface, ground, waste water.
All type of water parameters are tests in ECL lab also.
In order to provide sophisticated analysis of water quality ECL established Water Quality analysis Lab. Fully furnished with its own instruments. All water quality tests are completed in our lab.
To see available water quality testing parameters of our Lab click below link
- ECL’s Drinking water quality analysis
- Ground water analysis lab
- Surface water quality analysis lab
- Industrial and domestic waste water analysis lab
Water, Waste Water Treatment and Salt Recovery
Energy Audit & ISO 14001
- Water reduction
- Electricity power
- Stream
- Industrial Energy Audit (Generator, Boiler, Compressor)
Geo-information based Services
Geo-information Science (GIS) and Remote Sensing (RS) services
- LULC mapping and statistical analysis
- River morphology and simulation model
- Flood simulation model
- LULC Change mapping and analysis
- Land cover conversion analysis
- Vegetation’s growth and health analysis
- Analysis and preparing seismic intensity and frequency map
- Earthquake zoning map
- Preparation study area/ Project area/Research area map
- Weather monitoring
Hazard Identification and Risk Assessment/ Occupational Health and Safety Assessment
Damage, Loss and need assessment activities
- Occupational health and safety monitoring
- Fire safety analysis
- Hazardous waste management and mitigation
- Survey and Geo-information based post disaster damage, loss and needs assessment
- Hazardous Chemical Handling
- Hazardous Workplace Analysis
Environmental Awareness and Education
ECL Offers Short Course on the Following (One, two, three & seven days)
Environmental Awareness of general and Industry Specific
- Industrial Effluent Treatment Plant (ETP) and operation & Maintenance of ETP
- Air Pollution Control System, Treatment & Monitoring Industrial Audit.
- Cleaner Production & Energy Efficiency.
- Occupational Health & Safety & Environment.
- ISO 9001 & 14001.
- Environmental Impact Assessment (EIA).
Water Quality Lab Provides the Following Testing
- pH
- Color
- Salinity
- Turbidity
- Sulphate
- Temperature
- Total Nitrogen
- Free Ammonia
- Organic matter
- Total Phosphorus
- Residual Chlorine
- Ortho-Phosphate,
- Dissolve Oxygen (DO)
- Kjheldal Nitrogen (TKN)
- Colloidal Silica (As SiO2)
- Total Dissolve Solids (TDS)
- Electrical Conductivity (EC)
- Ammonia –Nitrogen (NH3–N)
- Chloride, Acidity and Alkalinity
- Chemical Oxygen Demand (COD)
- Silica and Reactive Silica, Colloidal Silica (As SiO2)
- Bio-chemical Oxygen Demand (BOD5)
- P-Alkalinity, M-Alkalinity & Total Alkalinity
- Total Solids (TS) and Total Suspended Solid (TSS)
- Chlorine content (Free chlorine or residual chlorine)
- Total Hardness (as CaCO3), Ca & Mg Hardness (as CaCO3)
- Nitrate –Nitrogen (NO3–N) and Nitrite –Nitrogen (NO2–N)
- Carbon di-oxide (CO2), Carbonate (CO3), Bicarbonate (HCO3)
- Iron, Mn, Ca, Cu, Na, K,As, Ba, Cd, Co, Cr, Ni, Pb, Sn, Zn, Al, Be, Hg, Mo, Sb, and Se
ECL provides Air Quality Test and Analysis using state-of-the-art and calibrated instruments.
Ambient Air Quality testing parameters
- PM2.5
- PM10
- SPM
- Sulphur Di-Oxide (SO2)
- Oxides of Nitrogen (NOx
- CO
- Ozone (O3)
- Ammonia
- Chlorine
- Black carbon
- Aromatic Hydrocarbon (AHC),
- Mercaptan,Black Carbon,
- Acid mist, Carbon-di-sulphide (CS2),
- All types of organic pollutant gases
- Pb, Cd, VOC, H2S, HC, HCl, H2SO4, Zn, Hg,
- Polynuclear Aromatic Hydrocarbon (PAH), Fluoride (F),
- Lead, Cadmium
Tests and Analysis for Indoor Air Quality Monitoring
- CO
- PM1
- PM2.5
- PM10
- VOC
- CO2
- Opacity Monitoring
- Continuous SPM
Noise level test and Analysis
- Continuous noise level monitoring
- Noise modeling
- Sound Pressure Level
Soil Test and Analysis
- pH
- Specific Gravity
- Texture
- Acidity
- Heavy Metal
Analysis of Sludge Parameters
- pH
- Ammonia, PO4
- Sulphate (SO4)
- Sludge Volume Index
- Fe, Cu
- Organic matter
- Oil and grease
- Phenol
- Leach ate test
- As , Ni, Ag, Cd, Cr, Co, Al, Hg
Analysis of Soil Nutrient Parameters
- pH,
- NKPS,
- EC (Electrical Conductivity)
- Total hardness, Acidity, Alkalinity,
- Fe, Mn, Cu, Zn, B, Mo, Pb, Cd, Cl, Ca, Mg,
- Cation exchange capacity, Moisture, Soil texture, Organic matter etc.
ECL also providing weather monitoring services. Most frequently analyzing the parameters
- Temperature
- Rainfall
- Humidity
- Wind Speed and Direction
- Sunshine
Natural gas monitoring test and analysis
Transformer and turbine oil analysis
Concrete non-destructive test
Compressive strength of hardened concrete Analysis
- Non-destructive gun test of concrete
Clean Room Analysis
Dioxin and furan monitoring and test analysis
Drinking Water
Drinking water quality Parameters testing in our lab
- pH,
- Temperature,
- Dissolve Oxygen (DO),
- Electrical Conductivity,
- Total Dissolve Solids (TDS),
- Chloride, Alkalinity, Turbidity,
- Chemical Oxygen Demand (COD),
- Total Hardness, Calcium Hardness,
- Bio-chemical Oxygen Demand (BOD5),
- Feacal Coliform, Total Coliform and E-coli
- Total Suspended Solid (TSS), Color, Nitrate,
- Ca, Mg, K, Iron, Cu, Zn, Mn, As, Pb, Cr, Ni, Co
- Nitrite, Sulphate, Phosphate, and Ammonia, Residual Chlorine etc.
Parameters tested in ground water analysis lab
- pH,
- Temperature,
- Dissolve Oxygen (DO),
- Electrical Conductivity,
- Total Dissolve Solids (TDS),
- Chloride, Alkalinity, Turbidity,
- Chemical Oxygen Demand (COD),
- Total Hardness, Calcium Hardness,
- Bio-chemical Oxygen Demand (BOD5),
- Total Suspended Solid (TSS), Color, Nitrate,
- Nitrite, Sulphate, Phosphate, and Ammonia, Residual Chlorine,
- Ca, Mg, K, Iron, Cu, Zn, Mn, As, Pb, Cr, Ni, Co, and Oil and Grease
Stack Emission
- Suspended Particulate Matter (SPM)
- Oxygen (O2)
- Sulphur Di-Oxide (SO2)
- Oxides of Nitrogen (NOx)
- Access Air
- Pb, Cd, Hg, HCl, H2S
- Carbon Monoxide (CO) in every stack point.
- Carbon Di-oxide (CO2) in every stack point.
- Opacity Monitoring
- Dioxin and furan monitoring and test analysis
Surface water sources for testing and analysis
- River Water (river, canal)
- Inland water body water (pond, lake, Swimming pool)
- Cooling tower
- Spa water
- Water feature
- Drainage water
- Legionella neophobia test
Measurement of sunshine intensity and monitoring weather condition in
- solar energy plant
- wind based power plant
Industrial and domestic waste water analysis lab
Name of the testing Parameters
- pH
- Color
- Phenol
- Phosphate
- Oil & Grease
- Temperature
- MLSS, MLVSS
- Total Nitrogen
- Organic matter
- Dissolve Oxygen (DO)
- Kjheldal Nitrogen (TKN)
- Colloidal Silica (As SiO2)
- Total Dissolve Solids (TDS)
- Total Suspended Solid (TSS)
- Ammonia –Nitrogen (NH3–N)
- Chloride, Sulphate and Sulphide
- Chemical Oxygen Demand (COD)
- Silica and Reactive Silica (As SiO2)
- Bio-chemical Oxygen Demand (BOD5)
- Total Phosphorus and Ortho-Phosphate
- Chlorine content (Free Cl) and Total Residual Cl
- Nitrate-Nitrogen (NO3-N)&Nitrite-Nitrogen (NO2-N)
- Iron, Mn, Cu, Na, K As, Ba, Cd, Co, Cr, Ni, Pb, Sn, Zn, Al, Be, Hg, Mo, Sb, and Se etc.